Raspberry Pi Pico 2 W Boards and Development Kits

Build a connected electronics project with a Raspberry Pi Pico 2 W microcontroller board. Choose the bare board, a header-equipped option or a pictured development kit to match how you want to prototype.

Choose a starting point for your next connected project

• ✅ Use the multifunction GPIO connections to work with compatible sensors and control components.
• ✅ Connect a project over 2.4 GHz Wi-Fi or Bluetooth using the board’s wireless hardware.
• ✅ Choose pre-soldered headers or a kit with project components to suit your prototyping setup.

Pico 2 W uses the RP2350 microcontroller with dual Arm Cortex-M33 or dual Hazard3 RISC-V cores at up to 150 MHz, 520 KB SRAM and 4 MB flash. It provides 2.4 GHz 802.11n Wi-Fi, Bluetooth 5.2, 26 multifunction GPIO connections and Micro USB B for power and programming. C/C++ and MicroPython are supported. Package options include Pico 2 W, soldered header versions, Basic, Starter, Development and Sensor kits. Components and header arrangements vary by selected option; programming is required.

The photographs compare board and kit configurations; only the pictured contents for the selected option are supplied, rather than every accessory shown across the gallery.

Choose the board or pictured kit for your next prototype.