DIY Heat-Insert Press Hardware Kit, With or Without Guide Head

Build a compatible DIY heat-insert press with a hardware kit and selected copper guide-head option.

✅ Gather the listed hardware for assembly - The kit supplies a rail, fasteners and inserts for the corresponding build.

✅ Choose whether the guide head is included - With and Without Guide Head options distinguish the extra copper component.

✅ Prepare the hardware around printed parts - The components support a build using separately supplied printed pieces and iron.

Prepare the Excluded Parts Before Assembly

Use the build instructions to prepare matching printed parts and a compatible soldering iron before assembly. The main image shows a completed example rather than the parts supplied in the hardware package.

Select With Guide Head if you require the listed copper guide head in addition to the base hardware. Check the complete contents against your planned build before starting.

Technical details

• 150 mm rail with MGN7H block; seven M3 × 5 × 4 mm inserts; six M2 nuts.
• Ten M2 × 6, one M3 × 6, four M3 × 10 and two M3 × 12 mm screws; three zip ties.
• Printed parts and soldering iron excluded; copper head only with named option.

Choose the hardware option and prepare the remaining press parts.