USB-C CAN and CAN FD Interface Module for PC Analysis

✅ See the bus on screen. The USB link brings compatible CAN traffic into your host analysis software.

✅ Cover classic and FD frames. CAN 2.0A, CAN 2.0B and CAN FD frames can be read from the same module.

✅ Set termination at the board. A jumper selects the onboard 120-ohm resistor when your bus needs it.

✅ Check status at a glance. A three-colour LED shows the device state during setup.

Bring CAN bus traffic onto your computer

A USB-to-CAN module built on an STM32G4 controller, for classic CAN and CAN FD networks on a development bench. The Type-C connection and jumper-selectable termination keep the setup compact.

Technical details

• Controller platform: STM32G4 series
• Protocols: CAN 2.0A, CAN 2.0B and CAN FD
• USB connection: Type-C
• Input: 5 V
• Bus terminals: CAN_H, CAN_L and GND
• Termination: jumper-selectable 120 ohms

Add the module to your bench and start reading compatible bus traffic.