W2022 Plug-In Temperature Controller

Switch a compatible heating or cooling load around a measured temperature. The W2022 plug-in controller combines a display and external NTC probe, with regional plug options for a suitable installation.

✅ Set the temperature response for the application - The controller uses the probe reading to manage the connected output.

✅ Measure at the point you choose - An external probe separates the sensing location from the controller body.

✅ Choose the regional connection format - EU and US options provide distinct plug arrangements.

Place the Probe Where the Control Needs to Read

A controlled load needs a temperature reading that represents the area being managed. Position the probe for the actual application, then configure the switching settings according to the controller's instructions.

Match the plug, voltage and load type before connection. The output rating must suit the equipment, particularly motors or other starting loads. Use any independent over-temperature protection required by the application rather than relying on the controller alone.

Technical details

• Model: W2022
• Type: plug-in temperature controller
• Supply/output described: AC 110-220 V; check selected version
• Probe: NTC 10K with approximately one-metre lead
• Temperature range described: -50 to 120 °C
• Plug options: EU or US
• Load limits: confirm unit label and equipment requirements

Choose the connection format and give a compatible load a temperature-based switching point.