Folding Corner Angle Finder with Stainless Steel Ruler
Transfer an awkward corner to your workpiece before marking a cut. This folding angle finder uses linked stainless steel arms and a sliding locking ruler to capture suitable corners. It is for DIY and woodworking layouts where a reusable physical reference is useful.
- ✅ Copy a corner at the work area — Linked arms adjust against suitable edges.
- ✅ Transfer the setting to your material — The locking screw holds the selected shape for marking.
- ✅ Repeat a matching layout — Keep the set reference when working on several similar pieces.
- ✅ Store it between jobs — Folding arms reduce the tool's footprint.
Capture the shape, then carry it to the workpiece
Open the arms to match the corner, slide the centre ruler and tighten the locking screw. The shape provides a reference for transferring the angle rather than requiring you to make a new paper template each time.
The central scale has included-angle and half-angle references for suitable layouts. Check the intended mark against your cutting setup and allow for material thickness, clearance and joint requirements. No accuracy tolerance is stated.
One manual angle finder is supplied. Workpieces, marking tools and cutting tools shown in examples are not included. It does not require a battery or external power.
Adjust the linked arms and tighten the locking screw.
The tool can provide a reference at suitable corners.
Transfer the captured shape before marking the workpiece.
Check the layout before making a final cut.
Compare the stated dimensions with the access around your corner.
The centre ruler carries included-angle and half-angle references.
Technical details
- Product: folding corner angle finder
- Material: stainless steel, stated
- Measurable angle stated: 0°–170°
- Approximate ruler length: 381 mm / 15 in
- Approximate ruler width: 20.3 mm
- Approximate measuring side length: 170.2 mm
- Adjustment: linked arms, sliding ruler and locking screw
- Package: 1 angle finder; marking and cutting tools excluded
- Power: manual; no battery required
Add a reusable corner reference to your toolkit and transfer your next layout before cutting.
Escolher opções