Adjustable Drip Irrigation Kit for Gardens | 15–30m Options
Run water to a row of pots without carrying a can to each one. This DIY drip-irrigation kit connects adjustable outlets along supplied tubing to a compatible garden tap. It is for gardeners arranging a watering line around pots, beds or greenhouse plants.
- ✅ Water the plants along one connected route — Tubing and tee joints let you distribute outlets around the planting layout.
- ✅ Change delivery as you check each pot — Each red dripper adjusts from closed to a stronger flow.
- ✅ Keep outlets beside the intended plant — Support stakes hold the tubing and drippers in position.
- ✅ Choose a line for the space available — Four kit lengths offer different tubing and outlet quantities.
Build the watering line around your planting layout
Plan the route before cutting the tubing, placing an outlet beside each plant you intend to water. Connect the tee joints, fit the red adjustable drippers and use the stakes to hold the line in position. Tap-connection fittings are included; check their fit with your water supply.
Turn each dripper to adjust its delivery, then test the complete line before routine use. Water output depends on supply pressure, layout and the number of open outlets. The kit contains no electronic timer, so the water supply must be controlled separately.
Choose 15M for 18 drippers, 20M for 24, 25M for 30 or 30M for 36, with matching tee-joint and stake quantities. The 15–25m kits have a tap adapter and connector; the 30m selection shows a two-way tap connector and two hose connectors. Only the selected kit is supplied.
Turn the red dripper cap to adjust water delivery or close the outlet.
Tee joints distribute the line, while stakes hold outlets beside the plants.
Plan and cut the tubing, fit the joints, then connect and test the assembled line.
Adjust each outlet for the intended pot; actual flow also depends on the water supply.
Technical details
- Type: DIY drip-irrigation kit
- 15M kit: 15m tubing, 18 drippers, 18 tees and 18 stakes
- 20M kit: 20m tubing, 24 drippers, 24 tees and 24 stakes
- 25M kit: 25m tubing, 30 drippers, 30 tees and 30 stakes
- 30M kit: 30m tubing, 36 drippers, 36 tees and 36 stakes
- Tubing: approximately 4mm internal / 7mm external diameter
- Drippers: eight-hole heads with individual flow adjustment and closure
- 15–25m connections: tap adapter and hose connector
- 30m connections: two-way tap connector and two hose connectors
- Package: selected kit; no electronic timer or tap included
Choose the kit length for your layout and place adjustable watering outlets beside the plants that need them.
Escolher opções