BGA Hot-Air Nozzle for SCOTLE IR360, HR6000 & HR460 Stations
Match the hot-air outlet to a component area when setting up a compatible BGA rework station. These upper and bottom nozzle options are specified for Honton, Zhuomao and selected SCOTLE stations. They are replacement accessories for electronics-rework users, not complete heaters.
- ✅ Choose an outlet for the component area — Separate nozzle sizes let you compare the opening with the intended work.
- ✅ Replace the relevant station accessory — Upper and bottom options distinguish which nozzle position you are ordering.
- ✅ Check the connection before fitting — The interface illustrations give a reference for comparing your existing station hardware.
- ✅ Build only the nozzle selection you need — Individual size options avoid assuming that the whole photographed range is supplied.
Select both the nozzle position and opening size
Choose Upper part or bottom, then the labelled opening size. The square options span 10 × 10 to 60 × 60 mm, with intermediate sizes varying by position, and a 29 × 44 mm rectangular option. The selector establishes what is offered; extra sizes in the gallery are not automatically available.
SCOTLE IR360, HR6000, HR460 and HR460C, plus Honton and Zhuomao equipment, are named in the compatibility information. Check the actual attachment and geometry against your existing nozzle before ordering. The upper nozzle information states a 58 mm interface diameter, 36 mm internal diameter and 40 mm height; do not assume those dimensions apply identically to every bottom option.
The supplied item is one selected nozzle. A station, heater, circuit board and complete set of nozzles are not included. Rework results still depend on the equipment, thermal profile and operator; no uniform-heating, component-protection or repair-success guarantee is made.
Different nozzle positions and attachments are shown; select the required individual option.
Bottom nozzles have a different interface from the upper-position examples.
The perforated section is part of the illustrated nozzle geometry.
Upper and bottom are separate options rather than a two-piece bundle.
Compare the outlet shape and attachment with the part being replaced.
The range photograph shows multiple separate options, not the quantity supplied.
Bottom-position examples include threaded central attachments.
The 58 mm reference illustrates an interface dimension rather than every outlet size.
The upper example shows its clamp connection and rectangular outlet.
Select the corresponding labelled size rather than assuming every pictured size is available.
The gallery includes a 21 mm example that is not a selectable size here.
The illustrated 36 mm example does not replace the size shown in the selector.
The selected bottom nozzle is an accessory; the heater is separate.
The gallery illustrates further configurations rather than a supplied full set.
Technical details
- Item: BGA hot-air rework nozzle accessory
- Positions: Upper part or bottom, selected separately
- Nominal square-opening range: 10 × 10 to 60 × 60 mm
- Rectangular option: 29 × 44 mm
- Intermediate sizes: vary by selected position
- Named station families: Honton, Zhuomao and SCOTLE
- Named SCOTLE models: IR360, HR6000, HR460 and HR460C
- Upper nozzle interface reference: 58 mm diameter; 36 mm internal diameter
- Upper nozzle height reference: 40 mm
- Package: 1 selected nozzle; station, heater and other sizes excluded
Compare the position, opening and connection with your station, then choose the individual nozzle for the job.
Alege opțiunile