M5 Motorcycle Tyre Pressure Monitor with 2 External Sensors
Check front and rear tyre readings on one display before setting off. The M5 motorcycle tyre-pressure monitor uses two external valve sensors and a separate receiver. It is for riders who confirm valve clearance and mounting fit and continue their normal tyre checks.
- ✅ Compare both tyres before a ride — Front and rear sensor readings appear together.
- ✅ Check temperature alongside pressure — The receiver displays both values for each sensor.
- ✅ Use familiar units — Select psi or bar and Celsius or Fahrenheit.
- ✅ Recharge between journeys — A magnetic USB lead connects to the receiver's rechargeable battery.
- ✅ Position the screen for a stationary check — The supplied bracket provides angle adjustment at a suitable mounting point.
Front and rear readings in one place
The external sensors fit compatible tyre valves and transmit to a separate receiver rather than the motorcycle's computer. Check valve thread, wheel clearance and bracket fit before installation. Locking nuts help retain the sensors but do not guarantee theft prevention.
High-pressure, low-pressure, high-temperature and sensor low-battery alerts are stated. Set thresholds according to the vehicle and tyre maker's instructions. This system supplements manual checks; it cannot guarantee correct inflation or report every developing fault.
The kit shows one monitor, bracket, two sensors, two locking nuts, a small spanner and magnetic USB lead. The receiver has a stated 500 mAh rechargeable battery; sensors use replaceable CR1632 cells. A mains adapter is not confirmed included. Make adjustments while safely stopped and keep the display clear of riding controls.
Front and rear readings share one receiver display.
Check bracket fit and clearance before mounting.
Follow the supplied environmental-use limits; do not assume immersion protection.
External sensors transmit to the separate receiver.
The magnetic USB lead charges the receiver.
The kit shows monitor, bracket, sensors, nuts, spanner and lead.
Pressure, temperature and clock information share the display.
Follow fitting instructions and check valve seals for leaks.
Technical details
- Model reference: M5
- System: motorcycle TPMS with 2 external valve sensors
- Units: psi/bar and °C/°F
- Receiver power stated: 500 mAh rechargeable battery; 5 V USB charging
- Sensor power stated: replaceable CR1632 cells
- Wireless frequency stated: 433.92 MHz
- Working pressure stated: 0–8 bar
- Alerts stated: high/low pressure, high temperature and sensor low battery
- Kit shown: monitor, bracket, 2 sensors, 2 nuts, spanner and magnetic USB lead
- Fit: suitable valves and mounting clearance required; mains adapter not confirmed included
Check valve and bracket fit, then add a shared front-and-rear display to your tyre-check routine.
Alege opțiunile