100W MPPT Solar Charge Controller Module
Add a configurable control stage between compatible solar panels and a battery setup. This module is labelled 100W MPPT with battery-type settings. It is for experienced builders who can verify the charging profile and system limits.
- ✅ Use a solar-specific charging stage — The controller is intended for photovoltaic input.
- ✅ Configure a matched battery setup — DIP-switch selection sets the described battery arrangement.
- ✅ Keep a small system organised — One module groups the charging-control function.
- ✅ Retain a configured setting — A memory function preserves the selected battery type.
Verify the battery profile before first use
The specification lists PV startup input of 11–45V and battery output of 12–45V. These ranges do not mean every battery chemistry or series count is supported; verify the exact profile and wiring.
The 100W and 10A labels are simultaneous limits to confirm against operating voltage. Use photovoltaic input only as instructed, not another battery source. Install close to the battery with suitable fusing, ventilation and weather protection; the module is not waterproof.
Technical details
- Type: MPPT solar charging module
- Power label: 100W
- PV startup range stated: 11–45V
- Battery output range stated: 12–45V
- Current label: 10A maximum
- Selection: DIP switches
- Environment: Dry, ventilated installation
- Contents: One controller module
Match the panel and approved battery profile before building the solar charging stage.
Välj alternativ