Manual Liquid Transfer Pump with Approx. 2m Hose

Start a suitable liquid-transfer task with a hand-operated bulb pump and hose. The manual format works without a battery, making it convenient when the liquid, containers and pump materials are properly matched.

• ✅ Operate without an electrical supply - squeeze the bulb to start a suitable transfer.
• ✅ Arrange the hose for the containers - the supplied length can be cut as required by the instructions.
• ✅ Keep the basic parts together - two clamps are listed with the pump and hose.

Match the Pump to the Liquid and Containers

Check the actual product's approved liquids and operating method before use. Position the containers and hose as instructed; flow depends on the arrangement and the substance being transferred.

The hose is listed as PVC. Do not assume compatibility with every fuel, solvent, oil or drinking-water application. Use only where the actual materials are explicitly suitable and handle the liquid according to its requirements.

Technical details

• Type: manual bulb transfer pump.
• Hose material listed: PVC.
• Listed hose length: approximately 2 m / 6.5 ft.
• Listed hose diameter: approximately 0.55 inch.
• Package: bulb pump, hose and two clamps.

Confirm liquid compatibility and prepare a properly matched transfer setup.