10-Pattern Garden Spray Gun with Optional 10m Hose Kit
Water flower pots with a shower pattern, then change to a directed rinse for an outdoor clean-up. This ten-pattern garden spray gun fits a compatible hose coupling and comes alone or with connection accessories. It is for gardeners choosing the attachment or kit that suits their existing hose.
- ✅ Match the spray to the next job — Turn the selector through ten patterns for watering or everyday rinsing.
- ✅ Pause as you move along the border — The thumb control starts and stops flow at the grip.
- ✅ Water without holding down a trigger — The flow control stays at the selected setting during a continuous pass.
- ✅ Choose how much equipment you need — Options range from the spray gun alone to a kit with a hose.
Pick the pattern and the package for your garden
Rotate the front ring until your chosen spray label aligns with the indicator. The ten settings include shower, mist, jet, flat, angle, vertical, centre, full, soaker and cone. Adjust the flow at the handle, testing the setting before directing it towards delicate plants.
The ridged grip gives your fingers a defined place to hold the gun, while the thumb control changes flow without a squeeze trigger. It operates from the connected water supply, so spray reach and output depend on that supply rather than a built-in pump.
Option A is the spray gun alone. Option B adds the connection fittings shown in its selection image but has no hose. The 10m option combines the gun with a ten-metre hose and connection fittings. Check your tap and hose compatibility before choosing; the package contains only the selected option.
Use a shower-style pattern to distribute water across a broader planting area.
The thumb control adjusts flow without a trigger that needs constant squeezing.
Choose a spray and flow setting suitable for the plants you are watering.
The selector ring changes patterns while the handle control adjusts flow.
Align the chosen pattern label with the indicator on the head.
The grip has ridged contact areas, and the inlet fitting uses an O-ring connection.
Ten labelled patterns give you different ways to direct the same hose supply.
Test the chosen pattern before beginning the watering pass.
Use the spray gun for garden watering and everyday outdoor rinsing.
The gun dimensions shown are 23 × 11 × 6.2cm.
The 10m selection includes the gun, hose and pictured connection fittings.
Check the connection method against your tap and hose before assembly.
Rotate the front ring to move between the labelled outlet patterns.
The inlet fitting can be removed from the threaded base.
The thumb control is positioned above the handgrip.
The 10m option adds a hose to the gun and connection fittings.
Option B includes the gun and pictured fittings, without a hose.
Option A supplies the spray gun alone.
The spray gun model is MY-8029; dimensions refer to the gun, not the hose kit.
Technical details
- Model: MY-8029
- Spray patterns: 10
- Patterns: shower, mist, jet, flat, angle, vertical, centre, full, soaker and cone
- Flow control: thumb-operated adjustment and on/off
- Gun materials: ABS and TPR grip covering
- Gun dimensions: 23 × 11 × 6.2cm
- Option A: spray gun only
- Option B: spray gun and pictured connection fittings; no hose
- 10m option: spray gun, 10m hose and pictured connection fittings
- Power: connected water supply; no motor or battery
Choose the package that fits your hose setup and put the right spray pattern at your fingertips.
Välj alternativ