No-Clean Airbrush Nozzle Set, 0.2/0.3/0.5 mm, 30 Pieces

Fine detail and broad coverage need different nozzles. This no-clean set gives you ten 0.2 mm, ten 0.3 mm and ten 0.5 mm zinc alloy nozzles in one box, so a clogged tip is swapped rather than cleaned mid-job. For model painters, customisers and anyone airbrushing in short sessions.

Three nozzle sizes, thirty spares

✅ Ten nozzles per size Ten each of 0.2, 0.3 and 0.5 mm, so you can work through a size without stopping.

✅ Swap instead of flushing A disposable tip comes off and a fresh one goes on, with no solvent soak between colours.

✅ Zinc alloy throughout Every nozzle in the box is zinc alloy, so the set keeps one metal through all three sizes.

✅ Detail and coverage together Small tip for fine lines, wide tip for primer and base coats, one box for both.

Colours change quickly when you are spraying small parts. Fit a fresh nozzle, drop the used one into a jar, and deal with the whole lot at the end of the session instead of flushing between every colour change.

The three numbers describe the nozzle opening, not the fitting on your airbrush. Base fittings differ between models, so compare the base of the nozzle you use now with the set before ordering.

Zinc alloy runs through the set, and a nozzle is a wear part: ten of each size means a damaged tip costs one nozzle rather than the box. Keep the sizes separate in a small parts tray so the 0.2 mm and 0.5 mm nozzles do not get mixed.

The set is built around nozzles, so check what is already on the bench: an airbrush body, hose and paint are not described as part of these thirty pieces.

Technical details

• Nozzle sizes: 0.2 mm, 0.3 mm and 0.5 mm
• Quantity: 30 nozzles, 10 of each size
• Material: zinc alloy
• Type: combination set
• Design: disposable, no-clean
• Use: airbrushing, models, DIY paint and decorating
• Variants: 4 options

Pick the set, keep a spare of each size, and swap tips instead of flushing.

See more: explore more airbrushes and painting kit