K660 K26 Rubber V-Belt, 660 mm, for Bench Drill Drive
A worn drive belt usually announces itself as a drill press that slips under load or squeals at start-up. This K660 rubber V-belt is 660 mm long, the same size sold as K26, so you can compare it with the belt on your bench drill before fitting. One belt is supplied.
A Replacement Belt for a Slipping Bench Drill
✅ Cross-check the code easily K660 and K26 name the same belt, so either number on your old belt points to this part.
✅ Same running length At 660 mm it matches the 26-inch belt you are taking off, so the pulleys stay as they were.
✅ A spare in the drawer A second belt on the shelf means a snapped belt does not end the working day.
✅ Rubber V-profile grip Rubber construction gives the belt the friction a V-pulley needs to turn the spindle.
Belts fail by degrees. First the drill press slips when the bit bites, then the belt glazes and squeals, and eventually it cracks at the back. Replacing it while the machine still runs is cheaper than stripping a pulley later.
Take the old belt off and lay it beside the new one. If the code reads K660 or K26 and the loop measures 660 mm, you have the right size; if your machine carries a different code, this belt is not the one.
The pack contains one driving belt. The drill press, pulleys and other parts are not included, so check that you are ordering the belt itself rather than a complete machine.
Technical details
- Belt code: K660 (sold as K26, same size)
- Length: 660 mm (26 in)
- Type: V-belt
- Material: Rubber
- Use: Bench drill drive belt
- Package contents: 1 x K660 driving belt
- Not included: Drill press, pulleys and other parts
- Brand: none declared on the product
- Origin: Mainland China
Check the code on your old belt, then keep this one in the workshop drawer as a spare.
Elige opciones