Telescopic Flexible-Head Socket Ratchet, Drive Size Options
Change the handle position when a straight socket ratchet leaves little room for your hand. This telescopic ratchet family combines an extending handle and pivoting head, with different drive-size options. It is for mechanical repairers using matching sockets on accessible fasteners.
- ✅ Find an approach around an obstruction — Tilt the head to place the handle where the surrounding assembly allows movement.
- ✅ Adjust the handle for the task — The telescopic shaft gives you a choice of working length before turning.
- ✅ Keep the socket engaged between strokes — The ratchet mechanism allows repeated turns without lifting off after every movement.
- ✅ Change direction at the head — The selector switches the ratcheting direction when moving between loosening and tightening.
Adjust the angle and reach before turning
Choose the square-drive size to match your sockets, then set the handle length and head angle before applying force. The family is shown in 1/4, 3/8 and 1/2 inch drive sizes; these are separate tools rather than interchangeable drive sizes on one handle.
The head pivots through the illustrated range, and the telescopic shaft changes the working length. The gallery shows a 345–475 mm example, but that measurement is not established for every option. Type A–F selections must be compared with their option image for the exact configuration.
The quick-release button and direction selector are shown on the ratchet head. A socket in a use example does not confirm a socket set is included. This is a manual ratchet handle rather than a calibrated torque wrench; use the assembly's specified final-tightening method.
The repair example uses a matching socket; socket inclusion is not confirmed.
Adjust the pivot before turning to find an angle that clears neighbouring parts.
The illustrated 345–475 mm extension range applies to the pictured example, not every type.
The group shows different sizes rather than confirming a three-handle package.
Match the square drive to your sockets; the family includes three drive sizes.
The head selector changes the ratcheting direction.
The release button is shown above the socket connection.
Different handle sizes may suit different working spaces; compare the selected option.
The illustrated 72-tooth mechanism uses short return movements.
The grip gives a hand position on the telescopic shaft.
Set the extension before loading the handle and use a correctly fitted socket.
Choose a head angle that leaves room for both the handle and your hand.
The application illustrates socket access; this is not a calibrated torque-setting tool.
Technical details
- Type: telescopic manual socket ratchet handle
- Head: flexible/pivoting, illustrated up to 180°
- Mechanism: 72-tooth ratchet
- Illustrated return arc: 5°
- Drive-size family: 1/4, 3/8 or 1/2 inch; selection dependent
- Options: Type A, B, C, D, E or F
- Controls: direction selector and quick-release button shown
- Handle: extending shaft with covered grip
- Length: varies by selection; 345–475 mm example shown
- Socket/accessory inclusion: not confirmed; check selected pack
Match the selected drive and configuration to your sockets, then choose a useful angle and reach for the repair.
Izberite možnosti