Mechanical Garden Water Timer, Up to 120 Minutes
Set a watering duration when starting a hose-fed garden session. This mechanical water timer fits between compatible tap and hose connections and counts down to shut off the flow. It is for home gardeners who want a simple manually started timer without batteries.
- ✅ Set the session as you start watering — A rotary dial selects the countdown duration.
- ✅ Let the countdown end the flow — The mechanical timer operates the shut-off valve.
- ✅ Avoid replacing timer batteries — The spring-driven mechanism needs no electrical supply.
- ✅ See the chosen duration at the tap — A large numbered dial keeps the setting visible.
Turn the dial for one timed watering session
Fit the timer to matching garden connections, open the water supply and turn the dial according to its instructions. The marked scale runs up to 120 minutes and returns towards zero as the mechanism counts down.
This is a one-session mechanical countdown, not a repeating daily schedule, delayed-start controller or remote smart timer. Start it again manually for the next watering session and check operation with your actual hose and supply.
One timer with the illustrated inlet adapter and outlet connector is supplied. Tap, hose and irrigation equipment are not included. Verify the thread standard and fit before installation; turn the tap off when the system is no longer needed rather than treating the timer as flood protection.
The large dial sets a mechanical countdown.
Use it for a manually started garden watering session.
No battery or mains connection is needed.
Check the fittings against your tap and hose.
The body fits between matching garden connections.
The countdown scale runs up to 120 minutes.
Hose and tap shown illustrate installation and are not included.
Check the adapter and thread standard before fitting.
Choose a duration appropriate for the area being watered.
Zero is the illustrated off position.
A separate sprinkler can be used with a matching hose setup.
Drip equipment is shown as a separate example.
The inlet includes an illustrated mesh screen.
Check joints after fitting to a compatible tap.
Start each timed session manually.
Allow space for the body and both connections.
Technical details
- Timer type: mechanical spring-driven countdown
- Maximum marked duration: 120 minutes
- Start: manual dial operation
- End action: timed water shut-off
- Power: no batteries or mains electricity required
- Material: plastic
- Colour: green and black
- Approximate size: 14 × 8.3 × 6 cm
- Package: 1 timer with illustrated connection fittings; hose and tap excluded
Set a duration for your next watering session with a straightforward dial you can operate at the tap.
Izberite možnosti