W5500 SPI Ethernet Network Module

Bring wired networking to a compatible microcontroller project. This W5500-based module provides an Ethernet interface with SPI communication for a supported embedded design.

✅ Add a wired network connection - The Ethernet module gives a compatible project a physical network link.

✅ Connect through a controller interface - SPI provides a communication route for your supported firmware.

✅ Keep the network stage modular - The separate board lets you plan it alongside the controller and power circuitry.

Build the Connection into the Project

A network-enabled sensor or small controller needs the right hardware and firmware together. Check the W5500 support in your development setup and plan the cable connection and board placement.

Confirm the actual module's supply input, logic levels and pinout before connecting it. A 3.3V/5V title does not establish that every pin accepts both voltages. This is a module, not a complete router or ready-programmed controller.

Technical details

• W5500 Ethernet module
• SPI controller interface
• TCP/IP support description
• One module
• Compatible firmware/controller required
• Verify power and logic-level requirements

Match the board and firmware and add a wired link to your project.